Second attempt at barbed wire

Another try, this time intended to be mass produced as we need 1,8m of the stuff for Saturdays game. The bases are 30x60mm MDF, 2mm thick, bought from Baccus. Two methods are used: pins driven through the board and then cut off underneath and pins cut down and glued in place using a hot glue gun. The barbed wire is from a regular 220V power cable, the individual strands twisted around a screw driver, sprayed black and glued in place. The one on the left below was then painted GW Tin Bitz, the one on the right GW Bolt Gun.
The ground is sand painted Burnt Umber and dry-brushed with Vallejo Iraqi Sand.